MODES OF OPERATION FOR THE HORNET POWERVAC

“The HORNET’s” MODES OF OPERATION



horn-1The HORNET discharging into a disposable insulation bag. When the bag is full, it is disposed of along with it’s contents. The bag will hold 400-600 lbs. of insulation.


horn-2The HORNET discharging into a reusable filter bag. The bag must be cleaned when it becomes so dirty that it reduces or restricts the vacuum. It makes no difference whether it lays on the ground or stands upright; it will perform the same and will be just as difficult to clean. To thoroughly clean the bag, it must be removed, turned inside out, and the dust shaken from it. As you can imagine, this is a bit messy and can’t be done just anywhere. That’s why we invented the HORNET’S NEST, shown below.


horn-3The HORNET discharging into the HORNET’S NEST which has 13 cubic feet of dust arrestor under four filter bags with 144 Sq. feet of filter area. This is more filter area than the single bag above which has only 85 sq. feet of filter area. After the fan motor is shut down the white bags, which are standing now, will collapse. We are then able to effectively and thoroughly shake the dust and debris from the bags into the dust collecting chamber below (The HORNET’S NEST). We may at this time elect to remove the three wing nuts on the dump door and stand the NEST on end, dumping the debris from it. The person cleaning the filter bags and nest will remain clean.


horn-4The HORNET’S NEST being moved on it’s mounted hand truck. After the bags and NEST are cleaned, the bags are placed in the NEST bag mount holes. The clean out door, that is held in place by three wing nuts is shown at the bottom of the NEST. The HORNET’S NEST can be cleaned almost anywhere. The debris could be dumped on to a sheet of plastic from the NEST and placed in a trash bin.

This is the Easiest, Fastest, Cleanest, and Simplest method of collecting and disposing of the debris.